Plate carrier GN 15

Item code: GN 15


  1. MOLLE MOLLE
  2. TOP product
  3. Recommended

The plate carrier is a modern concept of low-profile ballistic protection that offers protection only to vital organs and provides significantly more mobility to the user than a bulletproof vest.

A special feature of this model is the removable front flap with four magazine pouches also equipped with the Laser Cut MOLLE system.

 

The advantages of the GN 15 carrier include:

  • its lightweight construction
  • flexible yet variable side belts
  • movable padding of the shoulder straps fastened with a high-strength plastic buckle

 

The hard armor plates are inserted into this carrier from the bottom side.

A spacer mesh is used on the inner part of the carrier to support air circulation, and its padding at the point of contact between the plate and the body eliminates possible formation of blisters.

 

The set contains

  • front and back of the carrier


Product request



Increased protection - hard armor plates according to NIJ STD 0101.04: up to level IV

  • Back / rear plate
  • Front / chest plate

Compatible hard armor plates


Carrier variants: Elastic side straps


Material: 100% polyamide


Colour of material:

    Basic

  • Black

    Black

    • On request - from the minimum number of 100 pieces

  • MultiCam

    MultiCam

  • Olive

    Olive

  • Sand

    Sand


Sizes: UNI

Product request




Administration

Holster for forms PO 278

Holster for forms PO 278

The 21 x 18 cm case design allows for quick removal and use of stored items.

The back of the case is equipped with a MOLLE system.

Cordura material.
Document holder PO 112

Document holder PO 112

Document holder

The 18 x 11.5 cm holder design allows for quick removal and use of stored items.

The back of the case is equipped with a MOLLE system.

Cordura material.

Velcro or snap closure.
Pouch for TROOPER + ID PO 56

Pouch for TROOPER + ID PO 56

The design of the 18.5 x 14 cm pouche allows for quick removal and use of the stored item.

The back of the case is equipped with a MOLLE system.

Cordura material.

Batons

Baton holster PO 69

Baton holster PO 69

Holster for baton

The design of the holster allows quick removal and use of the stored item.

  • Dimensions: 5 x 20 cm
  • The back of the case is equipped with a MOLLE system
  • Cordura material
ESP baton holder

ESP baton holder

The design of the holster allows quick removal and use of the stored item

  • Dimensions: 5 x 21 cm 
  • The back of the case is equipped with a MOLLE system
  • Cordura material
Baton holster PO 107

Baton holster PO 107

The design of the 22 x 4.5 cm holster allows quick removal and use of the stored baton.

The back of the case is equipped with a MOLLE system.

Cordura material.

Flashlights

Flashlight pouch PO 260

Flashlight pouch PO 260

The 17 x 5.5 cm design of the holster allows for quick removal and use of the stored item.

The back of the case is equipped with a MOLLE system.

Cordura material.

Grenade

Grenade pouch PO 97-3

Grenade pouch PO 97-3

Case for non-lethal 40 mm ammunition.

The design of the 17 x 12.5 cm case allows quick removal and use of the stored item.

The back of the case is equipped with a MOLLE system.

Cordura material.

.

 
Grenade pouch PO 82

Grenade pouch PO 82

The design of the 16.5 x 11 cm pouch allows for quick removal and use of the stored item.

The back of the case is equipped with a MOLLE system.

Cordura material.

Guns / tasers

Gun holster PO 137

Gun holster PO 137

The 19.5x9.5 cm case design allows for quick removal and use of the stored item.

The back of the case is equipped with a MOLLE system.

Cordura material.
Holster for pistol CZ 75 Compact, PO 121

Holster for pistol CZ 75 Compact, PO 121

The 20.5 x 13 cm holster design allows for quick removal and use of the stored pistol and flashlight. 

The back of the case is equipped with a MOLLE system.

Cordura material.

Side flashlight case
Gun holster PO 88

Gun holster PO 88

The design of the 21x13 cm case allows for quick removal and use of the stored item.

The back of the case is equipped with a MOLLE system.

Cordura material.
Gun holster PO 24

Gun holster PO 24

The 14 x 10 cm case design allows for quick removal of the stored item.

The back of the case is equipped with a MOLLE system.

Cordura material.
Holster for TASER X26

Holster for TASER X26

The 11.5 x 18.5 cm pouch design allows for quick removal and use of the Taser.

The back of the case is equipped with a MOLLE system.

Cordura material.

 
Gun holster PO 6

Gun holster PO 6

The 20 x 10 cm case design allows for quick removal of the stored item.

The back of the case is equipped with a MOLLE system.

Cordura material.

Handcuffs

Handcuff pouch PO 271

Handcuff pouch PO 271

The design of the holster allows for quick removal and use of the handcuffs.

The back of the case is equipped with a MOLLE system.

Cordura material.
Pouch for textile handcuffs PO 90

Pouch for textile handcuffs PO 90

The design of the 8 x 14.5 cm holster allows for quick removal and use of the stored item.

The back of the case is equipped with a MOLLE system.

Cordura material.
Metal handcuff holder - narrow PO 124

Metal handcuff holder - narrow PO 124

The Y x Z cm housing design allows for quick removal and use of stored handcuffs.

The back of the case is equipped with a MOLLE system.

Cordura material.
Handcuff pouch PO 91

Handcuff pouch PO 91

The design of the 13.5 x 11.5 cm case allows quick removal of the handcuffs.

The back of the case is equipped with a MOLLE system.

Cordura material.

Flap fastening with velcro / patent.
Handcuff pouch PO 102

Handcuff pouch PO 102

The design of the 12 x 10 cm holder allows for quick removal and use of the stored handcuffs.

The back of the case is equipped with a MOLLE system.

Cordura material.

Fastening according to customer's choice - velcro / patent.

 

Knives

Knife pouch PO 108

Knife pouch PO 108

The 28 x 9 cm pouch design allows for quick removal of the stored item.

The back of the case is equipped with a MOLLE system.

Cordura material.
Knife pouch PO 10

Knife pouch PO 10

The design of the 27 x 5.5 cm holster allows quick removal and use of the stored knife.

The back of the case is equipped with a MOLLE system.

Cordura material.

Magazine / ammunition

2 piece magazine holster - large

2 piece magazine holster - large

The design of the 17 x 15 cm holster allows for quick removal and use of the stored item.

The back of the case is equipped with a MOLLE system.

Cordura material.

 
Luger 2-piece magazine holster

Luger 2-piece magazine holster

The 14.5 x 12 cm holster design allows for quick removal and use of the stored item.

The back of the case is equipped with a MOLLE system.

Cordura material.
Magazine pouch HK MP 5

Magazine pouch HK MP 5

The design of the 21x6 cm case allows for quick removal and use of the stored item.

The back of the case is equipped with a MOLLE system.

Cordura material.
4 magazine pouch

4 magazine pouch

The 16 x 18.5 cm pouch design allows for quick removal and use of the stored item.

The back of the case is equipped with a MOLLE system.

Cordura material.
Magazine pouch COMPACT CZ 75D

Magazine pouch COMPACT CZ 75D

The 13,5 x 5,5 cm cm design of the pouch allows quick removal of the stored item.

The back of the case is equipped with a MOLLE system.

Cordura material.
2 piece magazine pouch

2 piece magazine pouch

The design of the 11 x 23 cm pouch allows for quick removal and use of the stored item.

The back of the case is equipped with a MOLLE system.

Cordura material.
Case for shot cartridges PO 281

Case for shot cartridges PO 281

The Y x Z cm design of the case allows for quick removal and use of the stored item.

The back of the case is equipped with a MOLLE system.

Cordura material.
PO 75 magazine holster

PO 75 magazine holster

Holster for two magazines SA-58/AK-47

  • Dimensions: 10 x 24 cm 
  • interior space divided by partition
  • The back of the case is equipped with a MOLLE system
  • Cordura material
Magazine pouch for Glock 17 PO 31/1

Magazine pouch for Glock 17 PO 31/1

The design of the holster allows quick removal and use of the stored item.

  • Dimensions: 12,5 x 14 cm
  • The back of the case is equipped with a MOLLE system
  • Cordura material
Magazine pouch for Glock 17 PO 31

Magazine pouch for Glock 17 PO 31

The design of the holster allows quick removal and use of the stored item.

  • Dimensions: 7 x 14 cm
  • The back of the case is equipped with a MOLLE system
  • Cordura material
Magazine holster for Glock 17 PO 31/3

Magazine holster for Glock 17 PO 31/3

The design of the holster allows quick removal and use of the stored item.

  • Dimensions: 7 x 12 cm
  • The back of the case is equipped with a MOLLE system
  • Cordura material
Magazine pouch for Glock 17 PO 31/2

Magazine pouch for Glock 17 PO 31/2

The design of the holster allows quick removal and use of the stored item.

  • Dimensions: 7 x 16 cm
  • The back of the case is equipped with a MOLLE system
  • Cordura material

MEDICAL

First aid pouch PO 168

First aid pouch PO 168

  • Pouch designed for a paramedic
  • MOLLE system pouch
  • Self-expanding zipper for easy and quick access - pull the top handle to unzip the case
  • Choice of purchase with or without equipment
  • Cordura material

 
First aid pouch PO 136

First aid pouch PO 136

The 17 x 13 cm case pouche allows for quick removal and use of all stored items.

The back of the case is equipped with a MOLLE system.

Cordura material.

.
First aid pouch PO 277

First aid pouch PO 277

The 22 x 17,5 cm pouch design allows for quick removal of the stored item.

The back of the case is equipped with a MOLLE system.

Cordura material.
First aid pouch PO 267M

First aid pouch PO 267M

The design of the 16 x 15 cm case allows for quick removal of the stored item.

The back of the case is equipped with a MOLLE system.

Cordura material.

Other

Camelbak PO 22/1

Camelbak PO 22/1

The back of the case is equipped with a MOLLE system.

Cordura material.
Fire extinguishing spray holster Pyrocool PO 71

Fire extinguishing spray holster Pyrocool PO 71

The design of the 8 x 30.5 cm holster allows for quick removal and use of the stored item.

The back of the case is equipped with a MOLLE system.

Cordura material.

 
Detonator pouch PO 65

Detonator pouch PO 65

The 13 x 8.5 cm case design allows for quick removal of the stored item.

The back of the case is equipped with a MOLLE system.

Cordura material.
Detonator pouch PO 274

Detonator pouch PO 274

The design of the 13 x 13 cm pouch allows quick removal and use of the stored item.

The back of the case is equipped with a MOLLE system.

Cordura material.
PET bottle holder PO 126

PET bottle holder PO 126

The design of the Y x Z cm holder allows quick removal and use of the stored PET bottle.

The back of the case is equipped with a MOLLE system.

Cordura material.
Damp pouche PO 26

Damp pouche PO 26

The 16 x 23 cm design of the pouche allows for quick removal and use of the stored item.

The back of the case is equipped with a MOLLE system.

Cordura material.
Holster for KASR TORNADO - pepper spray PO 55

Holster for KASR TORNADO - pepper spray PO 55

The design of the 16 x 5 cm holster allows for quick removal of the stored item.

The back of the case is equipped with a MOLLE system.

Cordura material.
Pouch for water bag PO 22

Pouch for water bag PO 22

Camelbak

  • Dimensions: 18 x 40 cm
  • Simple hydration bag

  • The back of the case is equipped with a MOLLE system.

  • Cordura material.

  • can be worn as a backpack or attached to a molle system on a tactical or ballistic vest

Radios / mobile phones

Motorola DP 3601 radio pouch

Motorola DP 3601 radio pouch

The design of the 9 x 19 cm pouch allows for quick removal and use of the stored item.

The back of the case is equipped with a MOLLE system.

Cordura material.
Mobile phone pouch PO 92/2

Mobile phone pouch PO 92/2

The design of the holster allows quick removal and use of the stored item.

  • Dimensions: 7,5 x 13,5 cm
  • The back of the case is equipped with a MOLLE system
  • Cordura material
Mobile phone pouch PO 92/1

Mobile phone pouch PO 92/1

The design of the holster allows quick removal and use of the stored item.

  • Dimensions: 7,5 x 13,5 cm
  • The back of the case is equipped with a MOLLE system
  • Cordura material

 

 
Mobile phone pouch PO 8

Mobile phone pouch PO 8

The design of the holster allows quick removal and use of the stored item.

  • Dimensions: 6 x 13 cm
  • The back of the case is equipped with a MOLLE system
  • Cordura material
RDST Matra pouch PO 273

RDST Matra pouch PO 273

The 13.5 x 15.5 cm pouch design allows for quick removal and use of the stored item.

The back of the case is equipped with a MOLLE system.

Cordura material.
RDST Motorola PO 14 radio pouch

RDST Motorola PO 14 radio pouch

The design of the holster allows quick removal and use of the stored item.

  • Dimensions: 9 x 16 cm
  • The back of the case is equipped with a MOLLE system
  • Cordura material
RDST Matra PO 25 radio pouch

RDST Matra PO 25 radio pouch

The design of the 9.5 x 18.5 cm pouch allows quick removal and use of the stored item.

The back of the case is equipped with a MOLLE system.

Cordura material.
PO 72 mobile phone case

PO 72 mobile phone case

The design of the 5 x 13 cm case allows for quick removal and use of the stored item.

The back of the case is equipped with a MOLLE system.

Cordura material.
Radio holster PO 92

Radio holster PO 92

The design of the 16x9 cm case allows for quick removal and use of the stored item.

The back of the case is equipped with a MOLLE system.

Cordura material.
RDST Matra Jupiter holster PO 98

RDST Matra Jupiter holster PO 98

The 18 x 7 cm holster design allows for quick removal and use of the stored item.

The back of the case is equipped with a MOLLE system.

Cordura material.
RDST Matra Jupiter holster PO 106

RDST Matra Jupiter holster PO 106

The 16 x 6.5 cm holster design allows for quick removal and use of the stored item.

The back of the case is equipped with a MOLLE system.

Cordura material.
Radio holster PO 270

Radio holster PO 270

The 20 x 9 cm case design allows for quick removal of the stored item. The back of the case is equipped with a MOLLE system.

Cover of the case with a hole for the antenna.

Flap with velcro or snap.

The back of the case is equipped with a MOLLE system.

Cordura material.

UNI

UNI pouch PO 267

UNI pouch PO 267

The design of the 16 x 15 cm case allows quick removal of the stored item. 

Front velcro wall.

The back of the case is equipped with a MOLLE system.

Cordura material.
UNI pouch PO 104

UNI pouch PO 104

The 17.5 x 14 cm case design allows for quick removal of the stored item.

The back of the case is equipped with a MOLLE system.

Cordura material.
UNI pouch PO 103

UNI pouch PO 103

The 15.5 x 14 cm case design allows for quick removal and storage of items.

The back of the case is equipped with a MOLLE system.

Cordura material.
UNI pouch PO 100

UNI pouch PO 100

The design of the holster allows quick removal and use of the stored item

  • Dimensions: 13,5 x 14,5 cm 
  • The back of the case is equipped with a MOLLE system
  • Cordura material

Plate carriers lightweight plate carriers

Inquiry form

Plate carrier GN 15

For selected properties, it is only possible to select a custom option from a specified number of pieces and above. If you are interested in a specific demand for piece projects, use the VIP development option.

You can close the form and the data entered into it will not be deleted, provided you stay on the product page.

Our data


GARED s.r.o.
Družstevní 278, 517 01 Solnice

+420 494 596 110
+420 494 596 116
info@gared.cz

ID No.: 288 19 446
VAT: CZ28819446
Bank Acc. No.: 43-9989300267/0100
IBAN: CZ1101000000439989300267
SWIFT: KOMBCZPPXXX

Your data

Select